Enjoy 10% discount on your first order. Sign Up for our membership now!

Try our FREE SAMPLES before you buy

Dymo LabelWriter EL40 Label

•Print Area: 2.2 in maximum print width

•Speed: 30 pages per minute

•Connectivity: Serial

•Print methods: Available with Direct Thermal printing

Showing 33–36 of 36 results

Dymo 30252 Lavender Compatible Address Labels 1-1/8″ x 3-1/2″

350 Labels / Roll

Quantity

Choose a quantity

AS LOW AS $4.33

Compatible Dymo 30256 Cyan Shipping Labels 2-5/16″ x 4″

300 Labels / Roll

Quantity

Choose a quantity

AS LOW AS $8.04

Out Of Stock!

Compatible Dymo 30256 RED Shipping Labels 2-5/16″ x 4″

300 Labels / Roll

AS LOW AS $8.04

Compatible Dymo 30256 Blue Turquoise Shipping Labels 2-5/16″ x 4″

300 Labels / Roll

Quantity

Choose a quantity

AS LOW AS $8.04

Resolution	203 dpi
Print width	2.2 in
Print speed	30 pages per minute
Interface	Serial
Media Type	Thermal Paper
Barcodes	7 x barcode
Width	6.5 in
Depth	6.5 in
Height	3.5 in
Weight	5.07 lbs

How do I install my Dymo LabelWriter EL40?

Load the Printer Driver CD on your computer
Follow the on-screen instructions to install the software
Plug-in your printer to a power supply and connect it to the computer via its USB cable
Do a test print to confirm the software\'s successful installation

What are the label sizes for Dymo LabelWriter EL40?

Before you print with your Dymo LabelWriter EL40,make sure you have the suitable label ready for use.The EL40 can print an array of different labels uses up to 1-1/5" wide labels.

How do I load labels into Dymo LabelWriter EL40?

Open the printer cover
Load the new label reel on the spool
Insert the spool assembly to the cradle
Load the label to the feed slot
Close the lid
Tap the button under the green LED light to start paper feeding

How do you reset a Dymo LabelWriter EL40?

Turn on your printer.Wait for about half a minute for it to completely start up
Using a pointed non-metallic item,long-press the RESET button at the back of the printer for 5 seconds
Release the RESET button
Your printer now resets to factory default settings

How do you calibrate a Dymo LabelWriter EL40?

Please turn on your printer and load it with a label
Long press the Feed button for 5 to 10 seconds
After the blue light starts flashing,release the Feed button
Your printer will begin calibrating
Press the Form Feed button to stop

Download Dymo LabelWriter EL40 Driver Here.

Dymo LabelWriter EL40 Label

Filter by Size

Filter by Label Width

Filter by Usage

Filter by Usage