•Print Area: 6.61 in maximum print width
•Speed: 479.5 inches per minute
•Connectivity: Parallel, USB, LAN, Serial
•Print methods: Available with Direct Thermal/Thermal printing
Showing all 9 results
4″ x 6″ Fanfold Labels – 2 Labels / Fold – Direct Thermal Labels
2-1/4″ x 4″ Direct Thermal Labels – 1″ Core
4″ x 6″ Direct Thermal Fanfold Labels – 1 Label / Fold
1-1/4″ x 1″ Direct Thermal Labels – 1″ Core
4″ x 6″ Fanfold Labels – 2 Labels / Fold – (1000 Labels / Stack)
1-1/2″ x 1/2″ Direct Thermal Labels – 1″ Core
4″ x 6″ Direct Thermal Labels – 3″ Core
1″ x 1/2″ Direct Thermal Labels – 1″ Core
2″ x 2″ Direct Thermal Labels – 1″ Core
How do I install my Zebra 170xiiii plus?
Connect your printer to your computer using USB cable,serial cable or parallel cable from its package.Download the printer driver from Zebra\'s website and install it on your computer.Follow the instructions given by the Printer Setup Wizard to complete the installation process.
What are the label sizes for the Zebra 170xiiii plus?
The Zebra 170xiiii plus can print continuous forms,fanfold paper,and labels up to 6.61 inches wide and 39 inches long.The maximum media roll size is 7.1 inches.
How do you reset a Zebra 170xiiii plus?
How do you calibrate the Zebra 170xiiii plus?
Your printer will perform an auto-calibration once it feeds media after closing the printhead and after turning it on.It will automatically set the value it detects for the spaces between labels.Auto-calibration also occurs as part of both the sensor profile and media and ribbon sensor calibration procedures.
Download Zebra 170xiiii plus Driver Here.